Instructions / Assembly

Step 12
ATTACH HANDLE ASSEMBLY
ONTO AXLE AS SHOWN.
COG “GP” AND
RATCHET “GR”
SHOULD FIT INTO
THE GEAR TEETH
ON THE BARREL
Step 12
Step 12
SLIDE COMPONENT “GM” OVER THE
AXLE ON OPPOSITE SIDE OF BARREL
ENSURE AXLE
BUTTON ENGAGES
80
60
35
ENSURE SILVER BUTTON ON
AXLE IS ENGAGED INSIDE
THIS HOLE
IMPORTANT: HANDLE MUST
BE ASSEMBLED ON THE SIDE
WHERE THE BOLT FROM STEP
14 IS LOCATED
STEP 16
GM x 1
STEP 17