Specifications

Upper and Lower Limits
• When the data indicates upper and lower limits, the converted values are rounded down if the SI unit
value is an upper limit and rounded up if the SI unit value is a lower limit. Therefore, converted values
for the same SI unit value may differ after conversion. For example, consider 2.7 kgf/cm
2
in the
following specifications:
o 210260 kPa {2.12.7 kgf/cm
2
, 3038 psi}
o 270310 kPa {2.73.2 kgf/cm
2
, 3945 psi}
• The actual converted values for 2.7 kgf/cm
2
are 264 kPa and 38.4 psi. In the first specification, 2.7 is
used as an upper limit, so the converted values are rounded down to 260 and 38. In the second
specification, 2.7 is used as a lower limit, so the converted values are rounded up to 270 and 39.
(w) RX8-General Info
Page 48
Notes: