Specifications

Electrical Troubleshooting Tools
Jumper wire
CAUTION:
• Do not connect a jumper wire from the power source line to a body ground. This may cause
burning or other damage to wiring harnesses or electronic components.
• A jumper wire is used to create a temporary circuit. Connect the jumper wire between the
terminals of a circuit to bypass a switch.
Voltmeter
•
The DC voltmeter is used to measure circuit voltage. A voltmeter with a range of 15 V or more is
used by connecting the positive (+) probe (red lead wire) to the point where voltage will be
measured and the negative (-) probe (black lead wire) to a body ground.
Ohmmeter
(w) RX8-General Info
Page 41