Specifications

Fuse
Replacement
•
When replacing a fuse, be sure to replace it with one of the same capacity. If a fuse fails again, the
circuit probably has a short and the wiring should be inspected.
• Be sure the negative battery terminal is disconnected before replacing a main fuse.
• When replacing a pullout fuse, use the fuse puller.
Direction of View for Connector
• The viewing direction of connectors is indicated with a symbol.
• The figures showing the viewing direction are the same as those used in Wiring Diagrams.
• The viewing directions are shown in the following three ways:
(w) RX8-General Info
Page 39