Specifications

Hose Clamps
• When reinstalling, position the hose clamp in the original location on the hose and squeeze the clamp
lightly with large pliers to ensure a good fit.
Torque Formulas
• When using a torque wrench- SST or equivalent combination, the written torque must be recalculated
due to the extra length that the SST or equivalent adds to the torque wrench. Recalculate the torque by
using the following formulas. Choose the formula that applies to you.
Torque Unit Formula
N·m
N·m × [L/(L+A)]
kgf·m
kgf·m × [L/(L+A)]
kgf·cm
kgf·cm × [L/(L+A)]
ft·lbf
ft·lbf × [L/(L+A)]
in·lbf
in·lbf × [L/(L+A)]
A
The length of the SST past the torque wrench drive.
L
The length of the torque wrench.
(w) RX8-General Info
Page 16