Specifications

 Cotter pins
 Nylon nuts
• Depending on location:
 Sealant and gaskets, or both, should be applied to specified locations. When sealant is applied,
parts should be installed before sealant hardens to prevent leakage.
 Oil should be applied to the moving components of parts.
 Specified oil or grease should be applied at the prescribed locations (such as oil seals) before
reassembly.
Adjustment
• Use suitable gauges and testers when making adjustments.
Rubber Parts and Tubing
• Prevent gasoline or oil from getting on rubber parts or tubing.
(w) RX8-General Info
Page 15