Specifications

6. Check the area where the oil is leaking, then make necessary repairs.
Removal of Parts
• While correcting a problem, also try to determine its cause. Begin work only after first learning which
parts and subassemblies must be removed and disassembled for replacement or repair. After removing
the part, plug all holes and ports to prevent foreign material from entering.
Disassembly
• If the disassembly procedure is complex, requiring many parts to be disassembled, all parts should be
marked in a place that will not affect their performance or external appearance and identified so that
reassembly can be performed easily and efficiently.
Inspection During Removal, Disassembly
• When removed, each part should be carefully inspected for malfunction, deformation, damage and other
problems.
(w) RX8-General Info
Page 13