Owner`s manual
27
Getting started
If
necessary
Rear View
Monitor
Display menu screen will be shown when you press the (DISP) button.
Press the (DISP) button to display the display menu.
n Adjusting the screen quality
lScreen brightness
Press the on-screen button to brighten the screen, or to darken.
lScreen contrast
Press the on-screen button to increase contrast, to decrease.
Note
l
Select the on-screen button to restore the adjustment values to the default settings.
lThe screen changes to SETTINGS when the on-screen button is selected.
n Turning off the display
Select the on-screen button to turn off the display.
The screen will reappear if the (NAVI) button is pressed, or the on-screen
button, which is displayed on the screen when the (DISP) button is pressed, is selected.
n Daytime/Night screen (Black-out meter)
When the headlights are on, daytime mode can also be selected (if a brighter screen is
needed at night). This selection can only be done when the headlights are on.
• The screen can be returned to the daytime screen while the headlights or running lights
are on by pressing the dashboard illumination knob.
n Tilt display operation
Select the on-screen button to tilt the display, to close it.
The display angle can be adjusted in three stages.
When opening, the display angle changes one stage at a time each time the on-
screen button is pressed.
When closing, the display angle changes one stage at a time each time the on-screen
button is pressed.
Press the (DISP) button followed by the on-screen button to display the
settings menu.
Screen adjustments, beep alert and other settings
'<C)%FSSO4EKI1SRHE]2SZIQFIV41