Operation Manual

Updating your device with the new application

After the new application version has been put onto the MAP SD-card, you need to update

your navigation device. Do the following:

1. Insert the SD-card into the navigation device and close the door.

2. Turn the ignition key to the accessory setting.

The radio comes on but the engine is not started.

3. After approximately 10 seconds, press the NAVI button to see the navigation screen.

The following screen should be shown:

After about 1 minute the screen changes to the following screen. After the given time the

update starts automatically.

Tip: Do not use force to insert the SD-card. Make sure that the SD-card label is visible

when inserting the card.