Specifications

Black plate (362,1)
Device programming (Pairing)
To use Bluetooth
®
Hands-Free, the device
equipped with Bluetooth
®
has to be
programmed to the hands-free unit using
the following procedure.
A maximum of seven devices including
hands-free mobile phones and Bluetooth
®
audio devices can be programmed to one
vehicle.
NOTE
l
A device can be programmed only when the
vehicle is parked. If the vehicle starts to
move, the pairing procedure will end.
Programming is dangerous while driving -
pair up your device before you start
driving. Park the car in a safe place before
programming.
l
If a Bluetooth
®
device has already been
programmed to the vehicle as a Bluetooth
®
audio device, it does not need to be
programmed again when using the device
as a hands-free mobile phone. Conversely,
it does not need to be programmed again as
a Bluetooth
®
audio device if it has already
been programmed as a hands-free mobile
phone.
l
Since the communication range of a
Bluetooth
®
equipped device is about 10
meters (32 ft), if a device is placed within a
10-meter (32 ft) radius of the vehicle, it may
be detected/programmed unintentionally
while another device is being programmed.
1. Activate the Bluetooth
®
application of
the device.
NOTE
For the operation of the device, refer to its
instruction manual.
2. Press the pick-up button or talk button
with a short press.
3. Say: [Beep] “Setup ”
4. Prompt: “Se lect one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.”
5. Say: [Beep] “Pairing options”
6. Prompt: “Available options are: Pair,
Edit, Delete, List, or Set Pairing Code.”
7. Say: [Beep] “Pair”
8. Prompt: “Start the pairing process on
your Bluetooth
®
device. Your pairing
code is 0000 (XXXX). Input this on
your Bluetooth
®
device when
prompted on the device. See device
manual for instructions.”
9. Using the device , perform a search for
the Bluetooth
®
device (Peripheral
device).
NOTE
For the operation of the device, refer to its
instruction manual.
10. Select “Mazda” from the device list
searched by the device.
11. Input the 4-digit pairing code to the
device.
12. Prompt: “Please say the name of the
device after the beep.”
13. Say: [Beep] “XXXX - - -” (Speak a
“device tag”, an arbitrary name for
the device.)
Example: “Stan's device.”
NOTE
Speak a programmed “device tag” within 10
seconds.
If more than two devices are to be
programmed, they cannot be programmed with
the same or similar “device tag”.
6-122
Interior Comfort
Bluetooth® Hands-Free (Type A)
Mazda3_8CV6-EA-12H_Edition2 Page362
Wednesday, October 17 2012 3:14 PM
Form No.8CV6-EA-12H