Specifications
T126
AIR BAG SYSTEM
4. Align the mark on the clock spring with the mark
on the outer housing.
End Of Sie
CLOCK SPRING INSPECTION
A6E813066123W03
1. Remove the clock spring.
2. Inspect for continuity between the clock spring terminals using an ohmmeter.
• If not as specified, replace the clock spring.
Note
• When the vehicle-side connector of clock spring is disconnected, the terminals 1A,1B, 1C and 1D are
shorted to prevent unexpected deployment of the air bag module. When it is connected, the terminals are
open.
A6E8130W048
A6E8130W009
A6E8130W010