Specifications

S48
BUMPER
Front Bumper Installation Note
1. Spread the front bumper ends (wheel arches) apart.
2. Attach the front bumper to the body.
3. Press the front bumper connection portion into the body to engage with the bumper slider.
End Of Sie
FRONT BUMPER DISASSEMBLY/ASSEMBLY
A6E772650031W02
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
End Of Sie
BUMPER REINFORCEMENT REMOVAL/INSTALLATION
A6E772650031W03
1. Disconnect the negative battery cable.
2. Remove the front bumper. (See S47 FRONT BUMPER REMOVAL/INSTALLATION.)
3. Remove the headlight. (See T26 FRONT COMBINATION LIGHT REMOVAL/INSTALLATION.)
4. Suport the radiator and the condenser using the wire.
5. Remove the bolt.
6. Remove the bumper reinforcement.
7. Install in the reverse order of removal.
End Of Sie
1 Front bumper mesh
2 Front bumper fascia
A6E7726W004
A6E7726W005