Specifications

S46
FUEL-FILLER LID AND OPENER
FUEL-FILLER LID AND OPENER REMOVAL/INSTALLATION
A6E772456890W01
1. To remove the fuel-filler lid opener, remove the left side trunk side trim (4SD) or trunk side lower trim (5HB).
2. To remove the fuel-filler lid opener cable, perform the following and turn over the floor covering.
(1) Remove the driver-side front seat.
(2) Remove the driver-side front scuff plate.
(3) Remove the driver-side rear scuff plate.
(4) Remove the driver-side B-pillar lower trim.
(5) Remove the driver-side tire house trim.
(6) Remove the rear seat cushion. (R.H.D., 4SD)
(7) Remove the rear seat installation bolts (front side), then lift the rear seat cushion. (R.H.D., 5HB)
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
5. Adjust the fuel-filler lid. (See S46 FUEL-FILLER
LID ADJUSTMENT.)
End Of Sie
FUEL-FILLER LID ADJUSTMENT
A6E772442410W01
1. If not as specified, loosen the fuel-filler lid installation bolts, and reposition the fuel-filler lid.
2. Measure the gap and height between the fuel-filler lid and the body.
Clearance
a: 1.73.7 mm {0.0670.145 in}
b: -0.51.5 mm {-0.0190.059 in}
3. Tighten the bolts.
End Of Sie
FUEL-FILLER LID AND OPENER
1 Fuel-filler lid
2 Lift spring
3 Fuel-filler lid opener
4Cover
5 Fuel-filler lid opener lever
6 Fuel-filler lid opener cable
A6E7724W001
A6E7724W002