Specifications

S10
BONNET
BONNET REMOVAL/INSTALLATION
A6E771001084W01
Warning
•
••
• Removing the bonnet without supporting can be dangerous. The bonnet may fall and injure you.
Always perform the following procedure with at least another person.
1. Disconnect the windshield washer hose.
2. To remove the bonnet hinge, remove the front fender panel.
3. To remove the bonnet lock, remove the radiator grille.
4. To remove the bonnet release cable, remove the driver-side mud guard.
5. Remove in the order indicated in the table.
6. Install in the reverse order of removal.
7. Adjust the bonnet. (See S10 BONNET
ADJUSTMENT.)
End Of Sie
BONNET ADJUSTMENT
A6E771001084W02
Gap Adjustment
1. Remove the front fender.
2. Loosen the bonnet hinge installation bolts and
reposition the bonnet.
3. Tighten the bolts.
BONNET
1 Bonnet insulator
2 Shroud seal weatherstrip
3 Parting seal weatherstrip
4 Bonnet
5 Bonnet hinge
6 Bonnet stay
7 Bonnet switch connector (With theft-deterrent
system)
8 Bonnet lock
9 Bonnet release lever
10 Bonnet release cable
A6E7710W001
A6E7710W002