Specifications

R28
REAR SUSPENSION
REAR SHOCK ABSORBER REMOVAL/INSTALLATION
A6E741628700W01
Caution
•
••
• Performing the following procedures without first removing the ABS wheel-speed sensor may
possibly cause an open circuit in the harness if it is pulled by mistake. Before performing the
following procedures, remove the ABS wheel-speed sensor (axle side) and fix it to an appropriate
place where the sensor will not be pulled by mistake while servicing the vehicle.
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
.
Bracket Installation Note
1. Install the bracket as shown in the figure.
End Of Sie
REAR SHOCK ABSORBER INSPECTION
A6E741628700W02
1. Inspect the rear shock absorber in the same way as the front shock absorber. (See R12 FRONT SHOCK
ABSORBER INSPECTION.)
End Of Sie
REAR SHOCK ABSORBER DISPOSAL
A6E741628700W03
1. Dispose the rear shock absorber in the same way as the front shock absorber. (See R12 FRONT SHOCK
ABSORBER DISPOSAL.)
End Of Sie
REAR SUSPENSION
1 Rear shock absorber and bracket
2Bracket
(See R28 Bracket Installation Note)
3 Rear shock absorber
A6E7416W003
A6E7416W024