Specifications

R10
FRONT SUSPENSION
Bolt (Front Shock Absorber Lower Side) Removal Note
1. Support the knuckle with a jack to prevent from falling.
Piston Rod Nut Removal Note
Warning
•
••
• Removing the piston rod nut is dangerous. The shock absorber and spring could fly off under
tremendous pressure and cause serious injury or death. Secure the shock absorber in the SSTs
before removing the piston rod nut.
1. Protect the coil spring using a piece of cloth, then set the SSTs.
2. Compress the coil spring using the SSTs, and
remove the piston rod nut.
Coil Spring Installation Note
1. Temporarily install the coil spring, dust boot and mounting rubber on the shock absorber so that the lower end
of the coil spring is seated on the step of the lower spring seat.
2. Mark the coil spring, dust boot and mounting
rubber for proper installation as shown in the
figure.
3. Align the marks of the coil spring and dust boot.
Protect the coil spring and dust boot using a piece
of cloth, then set the SSTs.
A6E7414W008
A6E7414W039