Specifications

P20
CONVENTIONAL BRAKE SYSTEM
FRONT BRAKE (DISC) REMOVAL/INSTALLATION
A6E691233980W02
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
3. After installation, depress the pedal a few times, rotate the wheel by hand, and verify that the brake does not
drag.
.
Disc Plate Removal Note
1. Mark the wheel hub bolt and disc plate before
removal for reference during installation.
Disc Plate Installation Note
1. Remove any rust or grime on the contact face of the disc plate and wheel hub.
2. Install the disc plate and align the marks made before removal.
A6E6912W021
1 Flexible hose
2Cap
3Guide pin
4 Caliper
5 M-spring
6Disc pad
(See P21 Disc Pad Installation Note)
7Guide plate
8 Mounting support
9 Disc plate
(See P20 Disc Plate Removal Note)
(See P20 Disc Plate Installation Note)
A6E6912W037