Specifications

ON-BOARD DIAGNOSTIC
K61
K
Diagnostic procedure
STEP INSPECTION ACTION
1 VERIFY FREEZE FRAME DATA HAS BEEN
RECORDED
• Has FREEZE FRAME PID DATA been
recorded?
Yes Go to next step.
No Record FREEZE FRAME PID DATA on repair order, then
go to next step.
2 VERIFY RELATED REPAIR INFORMATION
AVAILABILITY
• Check for related Service Bulletins availability.
• Is any related repair information available?
Yes Perform repair or diagnosis according to available repair
information.
• If vehicle is not repaired, go to next step.
No Go to next step.
3 INSPECT TR SWITCH CONNECTOR FOR POOR
CONNECTION
• Turn ignition key OFF.
• Disconnect TR switch connector.
• Check for poor connection (damaged/pulled-
out pins, corrosion, etc.).
• Are TR switch terminals okay?
Yes Go to next step.
No Repair terminals or replace TR switch, then go to Step 9.
(See K15 TRANSAXLE RANGE (TR) SWITCH
REMOVAL/INSTALLATION.)
DTC P0708 Transaxle range (TR) switch circuit high input