Specifications
AUTOMATIC TRANSAXLE
K29
K
6. Install the solenoid valve in the control valve
body.
Tightening torque
7.810.8 N·m
{80110 kgf·cm, 7095.4 in·lbf}
7. Install the control valve body. (See K34
CONTROL VALVE BODY REMOVAL.)
8. Install the under cover.
9. Connect the negative battery cable.
10. Add ATF and, with the engine idling, inspect the
ATF level and inspect for leakage. (See K12
Automatic Transaxle Fluid (ATF) Level
Inspection.)
11. Carry out the mechanical system test. (See K6 MECHANICAL SYSTEM TEST.)
12. Carry out the road test. (See K9 ROAD TEST.)
End Of Sie
PCM INSPECTION
A6E561418880W01
1. Inspect the PCM. (See F45 PCM INSPECTION.)
End Of Sie
PCM REMOVAL/INSTALLATION
A6E561418880W02
1. Remove and install the PCM. (See F43 PCM REMOVAL/INSTALLATION.)
End Of Sie
AUTOMATIC TRANSAXLE REMOVAL/INSTALLATION
A6E561401030W07
1. Disconnect the negative battery cable.
2. Remove the battery and battery tray.
3. Remove the aircleaner component. (See F10 INTAKE-AIR SYSTEM REMOVAL/INSTALLATION.)
4. Remove the front tires and splash shield.
5. Remove the under cover.
6. Remove the steering gear and power steering pipe. (See N10 STEERING GEAR AND LINKAGE REMOVAL/
INSTALLATION.)
7. Remove the front auto leveling sensor. (See T32 FRONT AUTO LEVELING SENSOR REMOVAL/
INSTALLATION.)
8. Drain the ATF. (See K13 AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT.)
Warning
•
••
• Improperly jacking a transaxle is dangerous. It can slip off the jack and may cause serious injury.
Caution
•
••
• To prevent the torque converter and transaxle from separating, remove the transaxle without
tilting it toward the torque converter.
9. Remove in the order shown in the figure.
10. Install in the reverse order of removal.
11. Adjust the headlight zeroset. (See T31 HEADLIGHT ZEROSET.)
12. Add ATF to the specified level. (See K13 AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT.)
13. Carry out the mechanical system test. (See K6 MECHANICAL SYSTEM TEST.)
× : Test to be performed after the service work
14. Carry out the road test. (See K9 ROAD TEST.)
A6E5614W045
Service item
Test item
Line
pressure
test
Stall test
Time lag
test
ATX replacement ×
ATX overhaul ×××
Torque converter
replacement
××
Oil pump
replacement
×
Clutch system
replacement
××










