Specifications
GI16
FUNDAMENTAL PROCEDURES
HOSE CLAMPS
A6E201400004W14
• When reinstalling, position the hose clamp in the
original location on the hose and squeeze the
clamp lightly with large pliers to ensure a good fit.
End Of Sie
TORQUE FORMULAS
A6E201400004W19
• When using a torque wrench-SST or equivalent
combination, the written torque must be
recalculated due to the extra length that the SST
or equivalent adds to the torque wrench.
Recalculate the torque using the following
formulas. Choose the formula that applies to you.
A : The length of the SST past the torque wrench drive
L : The length of the torque wrench
End Of Sie
VISE
A6E201400004W16
• When using a vise, put protective plates in the jaws of the vise to prevent damage to parts.
End Of Sie
WGIWXX0035J
Torque Unit Formula
N·m N·m × [L/(L+A)]
kgf·m kgf·m × [L/(L+A)]
kgf·cm kgf·cm × [L/(L+A)]
ft·lbf ft·lbf × [L/(L+A)]
in·lbf in·lbf × [L/(L+A)]
WGIWXX0036E
X3U000WAW