Specifications

ON-BOARD DIAGNOSTIC [AUDIO]
T175
T
End Of Sie
DTC 07:ER01
A6E817566900W23
Diagnostic procedure
End Of Sie
DTC 07:ER02
A6E817566900W24
Diagnostic procedure
End Of Sie
3 INSPECT CD CHANGER (UPPER MODULE)
Clear DTC.
Insert and play CD for 12 seconds or more.
Start on-board diagnostic test mode.
Is DTC 06:Er07 displayed?
Yes Replace CD changer (upper module).
No Troubleshooting completed.
STEP INSPECTION ACTION
DTC 07:Er01 MD player
DETECTION
CONDITION
MD player cannot implement insert and eject commands.
POSSIBLE
CAUSE
Defective MD (broken or foreign material stuck/attached)
MD player malfunction
STEP INSPECTION ACTION
1 Is MD able to be ejected? Yes Go to next step.
No Replace MD player.
2 INSPECT MD
Inspect condition of MD where error has
occurred.
Is MD okay?
Yes Go to next step.
No Repair (remove foreign material) or replace MD, then go to
next step.
3 INSPECT MD PLAYER
Clear DTC.
Insert and eject MD with no defect.
Start on-board diagnostic test mode.
Is DTC 07:Er01 displayed?
Yes Replace MD player.
No Troubleshooting completed.
DTC 07:Er02 MD player
DETECTION
CONDITION
Note
When error occurs, error message CHECK MD is displayed in the LCD.
Cannot play MD normally or change tracks.
POSSIBLE
CAUSE
Defective MD (scratches or dirt)
MD player malfunction
STEP INSPECTION ACTION
1 VERIFY WHETHER MALFUNCTION IS IN MD
PLAYER OR MD
Play MD and select other song (change
tracks).
Is MD player able to change tracks?
Yes Go to Step 3.
No Not able to change particular
tracks.
Go to next step.
Not able to change any
tracks.
Change MD and perform
track-change again.
If MD player changes
tracks, then go to Step 3.
If not, replace MD player.
2 INSPECT MD
Inspect condition of MD where error has
occurred.
Is MD okay?
Yes Go to next step.
No Repair (remove foreign material) or replace MD, then go to
next step.
3 INSPECT MD PLAYER
Clear DTC.
Play MD and select other song (change
tracks).
Start on-board diagnostic test mode.
Is DTC 07:Er02 displayed?
Yes Replace MD player.
No Troubleshooting completed.