Specifications

T172
ON-BOARD DIAGNOSTIC [AUDIO]
End Of Sie
DTC 00:ER03
A6E817566900W16
Diagnostic procedure
End Of Sie
DTC 00:ER04
A6E817566900W17
Diagnostic procedure
End Of Sie
DTC 05:ER01
A6E817566900W18
3 INSPECT CASSETTE DECK
Clear DTC.
Insert and eject cassette tape with no defect.
Start on-board diagnostic test mode.
Is DTC 00:Er01 displayed?
Yes Replace cassette deck.
No Troubleshooting completed.
STEP INSPECTION ACTION
DTC 00:Er03 Cassette deck
DETECTION
CONDITION
Base unit detects that reel built into cassette deck does not operate.
POSSIBLE
CAUSE
Defective cassette tape (tape slack, pinched tape in internal cassette deck)
Cassette deck malfunction
STEP INSPECTION ACTION
1 INSPECT CASSETTE TAPE
Inspect condition of cassette tape where
error has occurred.
Is cassette tape okay?
Yes Go to next step.
No Repair (remove tape slack or repair pinched tape) or
replace cassette tape, then go to next step.
2 INSPECT CASSETTE DECK
Clear DTC.
Insert cassette tape with no defect.
Play cassette tape for 20 seconds or more.
Start on-board diagnostic test mode.
Is DTC 00:Er03 displayed?
Yes Replace cassette deck.
No Troubleshooting completed.
DTC 00:Er04 Cassette tape
DETECTION
CONDITION
Note
When error occurs, error message CHECK TAPE is displayed in the LCD.
Cassette tape is worn out.
POSSIBLE
CAUSE
Tape wear
Cassette deck malfunction
STEP INSPECTION ACTION
1 INSPECT CASSETTE TAPE
Inspect condition of cassette tape where
error has occurred.
Is cassette tape okay?
Yes Go to next step.
No Replace cassette tape, then go to next step.
2 INSPECT CASSETTE DECK
Clear DTC.
Insert cassette tape with no defect.
Play cassette tape for 20 seconds or more.
Start on-board diagnostic test mode.
Is DTC 00:Er04 displayed?
Yes Replace cassette deck.
No Troubleshooting completed.
DTC 05:Er01 CD changer (external type)
DETECTION
CONDITION
Changer function does not operate.
POSSIBLE
CAUSE
Defective CD (broken or foreign material)
Magazine malfunction
CD changer (external type) malfunction