Specifications

ON-BOARD DIAGNOSTIC [AUDIO]
T165
T
STARTING PROCEDURE FOR ON-BOARD DIAGNOSTIC TEST MODE
A6E817566900W01
Note
• All DTCs displayed in the on-board diagnostic test mode should be entered in the Audio Repair Order
Form.
1. Turn the ignition switch to the ACC or ON position.
2. First press the POWER button, then
simultaneously press the AM button and TAPE/
MD button for 2 seconds or more.
Note
• If several DTCs are in the memory, they can
be displayed by the SEEK button.
3. To stop the on-board diagnostic test mode, turn the ignition switch to the LOCK position.
End Of Sie
SUPPLIER IDENTIFICATION PROCEDURE
A6E817566900W02
Note
• When asking the supplier (service center) for repair or replacement, verify which supplier the module
belongs to and enter in the Audio Repair Order Form.
Identification With Printed Numbers/Label
1. Remove the audio unit.
2. Verify the supplier name written on the label attached on each module.
Identification With On-board Diagnostic Test Mode
1. Start the on-board diagnostic test mode.
2. Verify the part number and supplier code
displayed in the LCD.
Note
• When no DTCs are in the memory, part
numbers and supplier codes will not be
displayed.
End Of Sie
ON-BOARD DIAGNOSTIC [AUDIO]
1 AM button
2 TAPE/MD button
3 SEEK button (type A)
4 SEEK button (type B)
5 POWER button (type A)
6 POWER button (type B)
A6E8175W010
Part number Part name
00 Cassette deck (lower module)
03 CD player (upper module)
05 CD changer (external type)
06 CD changer (upper module)
07 MD player (lower module)
09 Base unit
Supplier code Supplier name
1FMS Audio
2 Panasonic
3Clarion
A6E8175W008