Quick Start Guide

16
When Driving
X Mark Full Low
Diesel Particulate Filter
The diesel particulate filter collects and removes most of the particulate matter
(PM) in the exhaust gas of a diesel engine.
Inspect the engine oil level periodically. When inspecting the engine oil, if the
engine oil level is exceeds the “X” mark on the dipstick, replace the engine oil.
Whenever the engine oil is replaced, the vehicles engine control unit needs to be
reset as soon as possible. Otherwise the wrench indicator light or engine oil
warning light may turn on.
For details, refer to Section 4, “Tyre Pressure Monitoring System”,“Diesel Particulate
Filter” or Section 6, “Owner Maintenance”.
The Tyre Pressure Monitoring System (TPMS) monitors the air pressure of all
four tyres. If the air pressure of one or more tyres is too low, the system warns the
driver by indicating the tyre pressure monitoring system warning light in the
instrument cluster and operating a beep sound.
In the following cases, system initialization must be performed so that the system
operates normally.
• A tyre pressure is adjusted.
• Tyre rotation is performed.
• A tyre or wheel is replaced.
• The tyre pressure monitoring system warning
light is illuminated.
Tyre Pressure Monitoring System
To reset the engine control unit, refer to the vehicle engine control unit reset
procedure or consult an expert repairer, we recommend an Authorised Mazda
Repairer.
Mazda2_8EC6-EE-14L_Edition1_QuickGuide.indb 18 2014/09/29 18:13:45