Specifications

DECELERATION CONTROL SYSTEM - EFIArticle Text (p. 2)

1984 Mazda RX7For iluvmyrx7.com

Fig. 1: Deceleration Control System

THROTTLE SENSOR TEST

1) To check and adjust throttle sensor, proceed as follows.

Warm up engine then turn it off. Connect voltmeters to checking

connector (Green) as shown in Fig. 2.

2) Turn ignition switch on and check to see if current flows

to one of the voltmeters. If current flows to both voltmeters or does

not flow at all, turn throttle sensor adjusting screw until current

flows to one of the voltmeters.

3) If current flows to both voltmeters, turn adjusting screw

counterclockwise. If current does not flow at all, turn adjusting

screw clockwise. After adjusting, install cap onto adjusting screw.