Instruction Manual

5
Dolphin Wave 75 Pool Cleaner | Operating Instructions
5. USING THE POOL CLEANER
5.1 Set Up
Attach the floating cable to the power supply by inserting it with the notch on the connector (1) lined up
with the groove in the socket on the power supply and turning clockwise (2).
° °
° °
Turn the power supply ON.
5.2 Putting the Pool Cleaner into the pool
If Wonder brush/ Wonder rings are dry,
soak them in water until soft.
Shake the robot from side to side or turn it
upside down to release trapped air.
Let it sink to the pool floor.
The Pool Cleaner will now operate until it has
reached the end of the cleaning cycle.
ON
° °
° °
<30 VDC; IP 54
GFI/ELI
40°C Max
104°F Max
3.5 m (12 ft)
<30 VDC; IP 54
<30 VDC; IP 54