DESIGN GUIDE B U I LT- I N REFRIGERATORS S AVO R T H E P E R F O R M A N C E .
CONTENTS DESIGN OPTIONS 2 MODEL SPECIFICATIONS 4 INSTALLATION GUIDE 5 CUTOUT DIMENSION SPECIFICATIONS 6 PROPER POSITIONING 7 PANEL INSTALLATION 9 FRAMED MODEL PANELS 10 OVERLAY MODELS 13 SIDE PANELS 16 SPECIAL CONSIDERATIONS 17 WARRANTY 19 S AVO R T H E P E R F O R M A N C E . ™ Important: Because of continuing product improvements, Jade reserves the right to change specifications without notice. Dimensional specifications are provided for planning purposes only.
THE JADE ™ BUILT-IN REFRIGERATOR The Jade™ built-in refrigerator is the new choice in built-in refrigeration excellence for discriminating homeowners — a choice that’s backed by the solid reputation of Jade as a leader in the development of innovative kitchen solutions. Now Jade continues that tradition with a built-in refrigerator that is setting new standards in style, storage and performance.
DESIGN O PT I O N S Refrigerators that satisfy a world of individual preferences. Jade™ built-in refrigerators offer a variety of models with design models do not include handles, you have the freedom to choose options and interior options that can easily be personalized for from a practically unlimited array of handle styles to match each client. From our cool and cultured stainless steel refrigerator, or complement the hardware on surrounding cabinetry.
Filtered ice and water dispenser with sleek, backlit design provides a distinctive look for built-in refrigerator dispenser models. The PuriClean® filtration system delivers fresh, filtered water and crushed or cubed ice anytime, and touch sensors activate with just a light touch. Stainless steel models feature a black dispenser surrounded completely by the stainless steel of the door and covered with stainless steel overlay.
MODEL SPECIFICATIONS JA D E ™ BUILT- I N R EF R I GERATO R M O D E L S SIZE STYLE TYPE HANDLE & TRIM COLOR MODEL 48" STAINLESS STEEL DISPENSER Stainless Steel Handle/No Trim RJRS4880 NON-DISPENSER Stainless Steel Handle/No Trim RJRS4870 DISPENSER No Handle/Silver Etched RJRS4881 NON-DISPENSER No Handle/Silver Etched RJRS4871 DISPENSER Silver Etched RJRS4882 NON-DISPENSER Silver Etched RJRS4872 DISPENSER Stainless Steel Handle/No Trim RJRS4280 NON-DISPENSER Stainless Steel Handle
IN STAL L AT I O N G U I DE – GENERAL CONSIDERATIONS Even though Jade™ built-in refrigerators are available in a wide range of design styles and configurations, the basic installation planning information for all models has things in common. After the decision has been made to install a Jade™ built-in refrigerator, be sure to review the installation requirements for the model design chosen. Make sure the opening where the unit will be installed is properly prepared. Refer to Figure 1.
INSTALLATION GUIDE – CUTOUT DIMENSION SPECIFICATIONS C TOP VIEW B A H F I J K D E G Exterior Dimensions Model Numbers 48" STAINLESS STEEL 48" OVERLAY 48" FRAMED 42" STAINLESS STEEL 42" OVERLAY 42" FRAMED RJRS4880 RJRS4881 RJRS4882 RJRS4280 RJRS4281 RJRS4282 RJRS4870 RJRS4871 RJRS4872 RJRS4270 RJRS4271 cm in. cm in. cm in. cm in. cm in. cm A. Cutout Height 83 3⁄4 212.7 83 3⁄4 212.7 83 3⁄4 212.7 83 3⁄4 212.7 83 3⁄4 212.7 83 3⁄4 212.7 B.
IN STAL L AT I O N G U I DE – PROPER POSITIONING Blocking and/or Anchoring the Refrigerator If there is a solid soffit above the unit and the clearance is 1" (2.5 cm) or less, you will not need to block the unit. For installations with clearances of more than 1" (FIG. 3), you must use the anti-tipping 2 x 4 and brackets provided (FIG. 4). More than 1" (2.5 cm) Clearance: Use the anti-tipping kit provided with the shipping crate. Locate and mark the two wall studs behind the unit.
INSTAL L AT I O N G U I DE – P ROPER POSITIONING Leveling Slide the unit in place and raise the front and rear levelers until the unit touches the brackets. Use a 3 ⁄8" socket for raising and lowering the unit. On each wheel housing, there are two 3⁄8" hex bolts. On the left side, the outside bolt will move the rear leveler and the inside bolt will move the front leveler. On the right side, the outside bolt will move the front leveler and the inside bolt will move the rear leveler (FIG. 5).
INSTAL L AT I O N G U I DE – PA NEL INSTA LLATION Integrating the Refrigerator into Kitchen Cabinetry If the customer has chosen a stainless steel model, it will arrive complete with wrapped stainless steel doors and stainless steel towel bar handles. You will not have to install panels. Jade offers 42" and 48" dispenser and nondispenser models with the stainless steel design.
INSTAL L AT I O N G U I DE – F RA M ED M OD EL PA NELS A. 1/4" (10.6 cm) Framed Panel Specifications for Framed Models Jade offers 42" and 48" dispenser and nondispenser models with the framed design. The framed trim remains visible when using the framed panel installation. These models accommodate up to a 1/4" (0.6 cm) panel depth. Nondispenser Freezer Panel Refer to page 20 for toe kickplate panel information. If installing side panels, refer to page 19. 42"-Wide Cabinet in.
INSTAL L AT I O N G U I DE – FRA M ED M OD EL PA NELS B. Decorator Panel Specifications for Framed Models Decorator panels for framed models cover the door trim for an attractive, seamless look that flows into the overall design of the room. Framed models include full-length extruded handles, unlike overlay models. Attention must be paid to hand clearance, or the depth of space between the decorator panel and the built-in handle. (See figures 12 and 13 on page 17 for more information.
INSTAL L AT I O N G U I DE – F RA M ED M OD EL PA NELS BACKER PANEL (A) Grille Panel W Width H Height (B) Freezer Dispenser Panel W Width W1 Width W2 Width H Height H1 Height H2 Height (C) Freezer Nondispenser Panel W Width H Height (D) Refrigerator Panel W Width H Height SPACER PANEL (A) Grille Panel W Width H Height (B) Freezer Dispenser Panel W Width W1 Width W2 Width H Height H1 Height H2 Height (C) Freezer Nondispenser Panel W Width H Height (D) Refrigerator Panel W Width H Height FRONT DECORATOR PANEL
INSTAL L AT I O N G U I DE – OV ERLAY M OD ELS Overlay Models The decorator panels for overlay models cover the door trim for an attractive, seamless look that flows into the overall design of the room. This application is often accomplished by using three panels: the decorative front panel, a spacer panel of .10" (2.5 mm) thickness, and a 1⁄4" (0.6 cm) backer panel. Other options to achieve this look (such as using one panel routed for different dimensions) may be available from your cabinet manufacturer.
INSTALLATION GUIDE – DECORATOR PANELS Installing Decorator Panels Be aware that panels used on refrigerators with the framed or overlay design have the potential for coming into contact with adjacent cabinets and/or countertops when the refrigerator doors are opened. You will want to be mindful of the surrounding cabinetry and space limitations when planning for decorator panels. Refer to the 90° door stop information in Figure 18 on page 21.
INSTAL L AT I O N G U I DE – INSTA LLING PA NELS O N D ISPENSER M OD ELS Freezer Dispenser Panel Installation 1. 2. 3. Power switch needs to be off. Switch is located in machine compartment area (see User Guide). Remove magnetic strip on door handle. Use of tape may be required to remove magnetic strip. (See FIG. 10a on page 17.) Remove four Phillips screws to remove door handle/trim. (See FIG. 10b on page 17.) (Refer to numbered illustrations for steps 4 — 10) 4.
INSTAL L AT I O N G U I DE – S ID E PA NELS /4" side panel fitted up to the cabinet trim (top view) of freezer side. /4" side panel fitted up to the cabinet trim (top view) of refrigerator side. 1 Installing Side Panels 1 backside of unit backside of unit If you are using side panels with the Jade™ built-in refrig- #8-32 1/2" screw #8-32 /2" screw 1 erator, they will need to be ⁄4" (0.6 cm) thick. Slide the 1 panel into position and secure with screws as indicated /2" (1.
INSTALLATION GUIDE – SPECIAL CONSIDERATIONS Special Considerations The illustrations on this page may be useful to help FIG.12 you understand some of the situations you may 2 7/16" Standard Handle 3 7/16" Optional Extended Handle face as you design and install the various models of Jade™ built-in refrigerators. FIG. 13 Figures 12 — 14 demonstrate handle placement for framed models. Figure 14 also shows the optional handle extension as referenced by the stair-stepped portion of the drawing. FIG.
INSTALLATION GUIDE – SPECIAL CONSIDERATIONS Figures 16 and 17 let you see what considerations you need to make for any custom panel applications, and how they may interact with adjacent cabinets and/or countertops. Also refer to the Installation Guidelines for framed and overlay models on pages 14 — 17. 90˚ Door Stop Both doors are designed to open 135˚. To restrict one or both doors to a 90˚ opening, use the door stops supplied in this kit. FIG.
JAD E™ B U I LT-I N R E F R I G ERATOR WA RRA NT Y Full Three-Year Warranty For three (3) years from the date of original retail purchase, any part which fails in normal home use will be repaired or replaced free of charge. Icemaker – when supplied with the refrigerator, the icemaker will be considered part of the refrigerator for warranty purposes.
