Brochure

EXTRA-HIGH EFFICIENCY UP TO 16 SEER TWO-STAGE

there are fewer startup and shutdown cycles

compared to single-stage units.

INDOOR SECTION

This system requires a variable-speed air handler or

variable-speed furnace with matched indoor coil (an

indoor coil typically sits on top of the furnace). The

variable-speed technology signiﬁcantly improves

system efﬁciency, as well as indoor air quality and

sound levels. By mixing air from ﬂoor to ceiling, the

variable-speed technology creates more uniform

temperatures. If you replace your air conditioner or

heat pump, Maytag highly recommends that you

also replace the existing

coil with a matched

Maytag

coil. By doing

this, you can ensure

maximum efﬁciency and

performance of your

comfort system.

aytag

systems include two main components.

The outdoor section is either the air conditioner

or the heat pump. The indoor section is an air

handler or a furnace and indoor coil. A warmer

climate will typically require a heat pump and an air

handler; cooler climates need an air conditioner and

a furnace.

ULTRA-INDOOR COMFORT

With its two-stage, variable technology features,

this line of air conditioners and heat pumps balance

indoor air temperatures better than a standard

single-stage system. It’s Ultra-Tech Copeland Scroll

Compressor works with the variable-speed indoor

section to decrease humidity levels and reduce hot

and cold spots.

TWO-STAGE TECHNOLOGY

During mild summer days, your system will work at

a lower capacity and during hotter days, it will work

at full capacity, which reduces the wear and tear

on your system. Sound levels are reduced because