Specifications

To avoid risk of electrical shock, personal injury or

death; disconnect power to unit before servicing.

Disassembly Procedures

WARNING

25.Insert wrench handle in shaft with graphic facing up.

Make sure the handle is fully seated on the shaft and

turn clockwise.

26.Lift out Spinner Support.

BACK

LEFT

BACK

LEFT

NOTE: The sleeve from the seal can come out on the

Spinner Support Shaft. If Spinner Support is

reinstalled, remove the seal sleeve. A new seal and

sleeve should be inserted into the Outer Tub.

BACK

LEFT

27. Insert the sleeve into the seal and press.

NOTE: When installing a new seal, make sure the

sleeve from the previous seal has been removed

and discarded.