Specifications

To avoid risk of electrical shock, personal injury or

death; disconnect power to unit before servicing.

Disassembly Procedures

WARNING

Inlet Water Valve Removal

1. Disconnect power supply to unit.

2. Remove water lines to the back of washer.

3. Lift Top Cover.

4. Remove wire harness from Water Valve.

5. Remove screw attaching Water Valve to Top Cover.

7. Pry up on the right side vapor seal flange while sliding

the valve to the right to release it from the top cover.

8. Slide Water Valve to the right to release from Top

Cover.