Dimensions Guide

2
Optional tools:
Parts supplied:
NOTE: All parts supplied for installation are in cardboard
insert in the top of the washer.
Location Requirements
Select proper location for your washer to improve performance
and minimize noise and possible “washer walk”. Install your
washer in a basement, laundry room, closet, or recessed area.
Parts needed: (Not supplied with washer)
To order, please refer to toll-free phone numbers on back page
of your Use and Care Guide.
Q
 8212656RP 10 ft. (3.0 m) Inlet hose, Black EPDM (2 pack)
Q
 8212641RP 5 ft. (1.5 m) Inlet hose, Black EPDM (2 pack)
Q
 8212646RP 4 ft. (1.2 m) Inlet hose, Black EPDM (2 pack)
Q
 8212545RP 5 ft. (1.5 m) Inlet hose, Red and Blue EPDM
(2 pack)
Q
 8212487RP 5 ft. (1.5 m) Nylon braided inlet hose (2 pack)
Q
 8212638RP 6 ft. (1.8 m) Nylon braided inlet hose, space
saving 90° elbow, hypro-blue steel couplings
(2 pack)
Q
 8212637RP 6 ft. (1.8 m) Inlet hose, Black EPDM, space
saving 90° elbow, hypro-blue steel couplings
(2 pack)
Alternate parts: (Not supplied with washer)
Your installation may require additional parts. To order, please
refer to toll-free numbers on back page of your Use and Care
Guide.
If you have: You will need:
Overhead sewer Standard 20 gal. (76 L) 39" (990 mm)
tall drain tub or utility sink, sump
pump and connectors (available from
local plumbing suppliers)
1" (25 mm) standpipe 2" (51 mm) diameter to 1" (25 mm)
diameter Standpipe Adapter
Part Number 3363920
Connector Kit Part Number 285835
Drain hose too short Extension Drain Hose Part
Number 285863
Connector Kit Part Number 285835
Lint clogged drain Drain Protector Part Number 367031
Connector Kit Part Number 285835
INSTALLATION REQUIREMENTS
Tools and Parts
Gather required tools and parts before starting installation.
4" min
(102 mm)
Wood block
Adjustable or open-end
wrench
9
/
16
" (14 mm)
Ruler or measuring tape
Level
Inlet hoses with
flat washers
Pliers that open to
1
3
⁄
4
" (44.5 mm)
Flashlight Bucket
Drain hose with clamp,
U-form, and cable tie
Tools needed:
40
1
/2"
(1029 mm)
without console
37"
(940 mm)
with console
30"
(766 mm)
29
1
/2"
(753 mm)
41
3
/8"
(1050 mm)
(front control models)
43
7
/16"
(1103 mm)
(rear control models)