Manual

ELECTRIC DRYER ELECTRICAL CONNECTIONS
Connectiiig 4-Wire Connectioii: Direct Wire
Connecting Remaining Wires
Connecting Ground and Neutral Wires (cont.)
2. Connect ground and neutral wire to center terminal block.
Connecting Direct Wire Ground --------------------
3. Connect ground wire (green or bare) with external ground
connector screw.
4. Connect remaining wires to outer terminal block.
Connectiiig 3-Wire Connection: Direct Wire
Use where local codes permit connecting
cabinet-ground conductor to neutral wire.
Direct wire cable must have 5 ft. (1.52 m) of extra length so
dryer
can be moved if needed.
Strip 372" (89 mm) of outer covering from end of cable. Strip
insulation
back 1" (25 mm). If using 3-wire cable with ground
wire, cut bare wire even with outer covering. Shape ends of
wires into a hook shape.
Connecting Neutral Wire
1. Loosen or remove center terminal block screw.
2. Connect neutral wire to center terminal block.
3. Connect remaining wires to outer terminal block.
26