Manual

ELECTRIC DRYER ELECTRICAL CONNECTIONS
Connectioii Options
Power Cord
4-wire receptacle (NEMA Type 14-30R)
Direct Wire
Connecting 4-Wire Connection: Power Supply Cord
IMPORTANT: A 4-wire connection is required where local
codes do not permit the use of 3-wire connections.
Standard Power Supply Cord Connectors
(T~ig> QZ®
Flanged spade connector Ring Connector
Connecting Ground and Neutral Wires
1. Remove center terminal block screw and the ground wire
by removing the external ground connector screw.
Connecting Direct Wire Ground
3. Connect ground wire (green or bare) with external ground
connector screw.
Connecting Remaining Wires
4. Connect remaining wires with outer terminal block screws.
24