Installation Guide
20
4. Remove 2 screws from the front tabs of the ame spreader.
Lift front of the ame spreader and pull forward to remove
tabs from rear of oven and set it aside on a covered surface.
5. Remove 2 screws from the bake burner.
6. Slide the front of the bake burner to the side to remove tab
from front of oven. Lift the back of the bake burner off the
oven orice, and set the bake burner aside.
7. Use a 3/8" (1 cm) nut driver or combination wrench and turn
the Propane gas bake burner orice spud counterclockwise
to remove. The spud will be stamped with a “57”.
8. Replace the “57” spud with a “51” spud. Install the Natural
gas bake burner orice spud, turning it clockwise until snug.
IMPORTANT: Do not overtighten.
9. Position the back of the bake burner over the oven orice,
and slide the tab on front of the bake burner into the front of
the oven.
10. Reattach the bake burner with 2 screws.
11. Insert the tabs on the rear of the ame spreader into the rear
of the oven.
12. Reattach the front tabs of the ame spreader to the oven
with 2 screws.
13. Position the front of the oven bottom panel toward the front
frame and lower the rear of the oven bottom panel into the
oven.
14. Reattach the oven bottom panel with 2 screws.
A
B
A. Screws
B. Flame spreader
A
B
A. Screws
B. Bake burner
A
A. Orice spud