Specifications

A – 6 16022498 ©2003 Maytag Appliances Company
Gas Conversion
5
&RQYHUWLQJ %DNH %XUQHU 2ULILFH
q ` _~ _ lW
1. Remove ALL oven racks.
2. Remove two screws in rear of oven
which hold oven bottom in place. See
figure 1.
3. Remove oven bottom by raising rear
of part so that front edge clears front
flange on front frame. Then lift oven
bottom straight up - then forward to
remove. See figure 2.
4. Remove oven burner by removing one
screw in front of burner and two
screws at rear next to ignitor. Raise
rear part of burner up till it clears the
opening in the bake chamber, then
gently lay the burner to the right side
in the bake chamber. It is not
necessary to unplug or remove the
ignitor from the burner. See figure 3.
cfdrob N
REMOVE SCREW
cfdrob O
cfdrob P
OVEN BOTTOM MUST CLEAR THIS
EDGE IN ORDER TO BE REMOVED
OPENING IN
BAKE CHAMBER
SCREW