Dimension Guide

ManualsBrandsMaytag ManualsFrench Door RefrigeratorsMFF2258FEZ

PRODUCT MODEL NUMBERS

PRODUCT DIMENSIONS

MFC2062 MFF2558

Because Whirlpool Corporation policy includes a continuous commitment to improve

our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation

Instructions packed with product. Specifications subject to change without notice.

Ref. W10621529B

5/16

3³⁄₄" (9.5 cm)

¹⁄₂" (1.25 cm)

To ensure proper ventilation for your refrigerator, allow for a

⁄2" (1.25 cm) space on

each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If

your refrigerator has an ice maker, make sure you leave some extra space at the

back for the water line connections.

If you are installing your refrigerator next to a fixed wall, leave 3

⁄4" (9.5 cm)

minimum on the hinge side (depending on your model) to allow for the door to

swing open.

NOTE: It is recommended that you do not install the refrigerator near an oven,

radiator, or other heat source, nor in a location where the temperature will fall below

55°F (13°C).

Model # Model Size

Height -

Overall

“A”

Height -

Top of

Cabinet

“B”

Depth -

Doors

Open 90°

“C”

Depth -

Drawer

Open

“D”

Depth -

With

Handles

“E”

Depth -

Without

Handles

“F”

Depth -

Cabinet

Only

“G”

Width -

Cabinet

“H”

Width -

Door

Open 90°

“I”

MFC2062

20.0 cu.ft.

70¹⁄₈"

(178.1 cm)

68¹⁄₂"

(174.0 cm)

43¹⁄₈"

(109.6 cm)

48¹⁄₈"

(122.3 cm)

29¹⁄₂"

(74.9 cm)

28"

(71.1 cm)

24¹⁄₈"

(61.3 cm)

35⁵⁄₈"

(90.5 cm)

39³⁄₈"

(100.7 cm)

MFF2258

22.1 cu.ft.

0¹⁄₈"

(178.1 cm)

68¹³⁄₁₆"

(174.8 cm)

47¹⁄₁₆"

(119.6 cm)

52¹⁄₈"

(132.4 cm)

34⁷⁄₁₆"

(87.5 cm)

31¹⁵⁄₁₆"

(81.1 cm)

28¹⁄₈"

(71.4 cm)

32⁵⁄₈"

(82.9 cm)

42³⁄₈"

(107.6 cm)

MFF2558

25.2 cu.ft.

0¹⁄₈"

(178.1 cm)

68³⁄₄"

(174.6 cm)

48"

(121.9 cm)

53¹⁄₈"

(134.9 cm)

35¹⁄₂"

(90.2 cm)

32⁷⁄₈"

(83.5 cm)

29¹⁄₈"

(74.0 cm)

35⁵⁄₈"

(90.5 cm)

43³⁄₈"

(110.2 cm)

Bottom Mount Refrigerator

MFF2258

Electrical: A 115-

volt, 60-Hz, AC-only,

15- or 20-amp fused, grounded electrical

supply is required. It is recommended

that a separate circuit serving only your

refrigerator be provided. Use an outlet

that cannot be turned off by a switch. Do

not use an extension cord.

NOTE: Before performing any type of

installation, cleaning, or removing a light

bulb, turn the control (Thermostat,

Refrigerator or Freezer Control

depending on the model) to OFF and

then disconnect the refrigerator from the

electrical source. When you are finished,

reconnect the refrigerator to the

electrical source and reset the control

(Thermostat, Refrigerator or Freezer

Control depending on the model) to the

desired setting. See “Using the

Controls.”

Water: A cold water supply with water

pressure between 30 and 120 psi (207

and 827 kPa) is required to operate ice

maker and water dispenser. If you have

questions about your water pressure,

call a licensed, qualified plumber.

IMPORTANT: The pressure of the water

coming out of a reverse osmosis system

going to the water inlet valve of the

refrigerator needs to be between 30 and

120 psi (207 and 827 kPa).

Reverse Osmosis Water Supply: If a

reverse osmosis water filtration system

is connected to your cold water supply,

the water pressure to the reverse

osmosis system needs to be a minimum

of 40 to 60 psi (276 to 414 kPa).

LOCATION REQUIREMENTS

overall

top of

cabinet

not incl.

handle

incl.

handle

cabinet

90˚90˚