Technical information

Component Testing
!
WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power before servicing, unless
testing requires power.
March 2005 16026117 Rev. 0
©2005 Maytag Services
7
123
45
Function 1M 2M 3M 5M 6M
Start
Run
= Contact closed
Illustration Component Test Procedure Results
TH2 Thermostatt
230F/110C
Unplug connectors and test Thermostat
terminals. Less than 1 ohm
Gas Valve Unplug connectors and test valve
terminals.
Check across terminals #1 and #3
(Booster Coil).
Check across terminals #1 and #2
(Holding Coil).
Check across terminals #2 and #3 (Both
coils in series).
Check across terminals #4 and #5
(Secondary Coil).
550 ohms
1350 ohms
1900 ohms
1300 ohms
Motor Contacts
Centrifugal Switch (Motor)
Gas Valve