Technical information

Service Specifications

16026747 April 2006

WARNING

To avoid the risk of electrical shock, personal injury, or death, disconnect power to unit before servicing, unless

testing requires power.

ENTER SERVICE MODE

Rotate the Cycle Selector Knob to the “Power Off”

position and press knob.

(All LED’s will be off).

Rotate the Cycle Selector Knob clockwise past

“Power Off” twice and stop at “Regular”.

(Watch LED’s

, they will illuminate as the knob is

rotated).

Rotate the Cycle Selector Knob counterclockwise back

to “Regular” and press knob.

• “Power Off”, “Rinse & Spin” LED will blink (if

error codes are present). “Regular” LED will be

illuminated.

• Model I.D. is displayed by the LED’s around the

bottom of the dial; see ‘MODEL CODE CHART’.

• Model I.D. can be redisplayed while in Service

Mode by setting knob to “Handwash” and

pressing; see ‘MODEL CODE CHART’ for Model

I.D.

EXIT SERVICE MODE

Rotate Cycle Selection Knob to “Power Off” and

press knob.

Allow 5 minutes of inactivity.

Disconnect power.