Technical information

Component Testing Procedures
!
WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power to washer before servicing, unless
testing requires power.
December 2003 16022843 Rev 0
7
CODE DISPLAY EXPLANANTION
8.00 8. SPECIAL PRICING STOPPING HOUR
00 This is the selection of the hour using military time (24 hour clock) that the Special Pricing will
"stop." Adjustable from 0 to 23 by pressing the Permanent Press keypad.
Press Woolens keypad once to advance to next code.
9.10 9. SPECIAL PRICE DAYS
10
Represents the day of the week and if special pricing is to occur on that day of the week. The last
digit is "0" for OFF or "S" for ON.
Press the Delicates & Knits keypad once to select "0" and once for "S."
Press Permanent Press keypad to advance to next day of the week.
Press Woolens keypad once to advance to next code.
A.00 A. VAULT VIEWING
00 "OFF."
SC
"ON." Press Delicates & Knits keypad once to select "SC." The money and/or cycle counter will
be viewable when the vault is opened. If "00" is selected, the service door will need to be opened
to activate, to view the money and/or cycle counter.
Press Woolens keypad once to advance to next code.
b.05 b. VALUE OF COIN 1 (QUARTER DROP)
05
Represents the number of nickels given to the value of each coin in code 607 "regular cycle price"
or "special cycle price." For example: b.05 equals five nickels or one quarter. Press Permanent
Press keypad to advance from 1 to 99 in nickels.
Press Woolens keypad once to advance to next code.
C.20 C. VALUE OF COIN 2 (DOLLAR DROP)
20
Represents the number of nickels given to the value of each Dollar dropped in the dollar coin slot.
For example: C.20 equals twenty nickels or one dollar. Press Permanent Press keypad to
advance from 1 to 99 in nickels.
Press Woolens keypad once to advance to next code.
d.00 d. COIN SLIDE OPTION
00 "OFF."
CS
"ON." Press Delicates & Knits keypad once to select "00" when coin drop is used, and "CS" for
models not using coin drops.
Press Woolens keypad once to advance to the beginning of the program mode.
WASHER DIAGNOSTIC MODE
The mode is entered by depressing Delicates & Knits keypad for one second while in any of the set-up modes one
through six or with a diagnostic code present. Diagnostic codes are cleared on entry and all display segments
should flash. If a diagnostic code persists, it must be corrected before the diagnostic cycle will start. With all
segments flashing, depressing the Woolens keypad starts the diagnostic cycle.
Display Function Time Length
C Cold Fill 3 seconds
H Hot Fill 3 seconds
A Agitation 3 seconds
S Spin 10 seconds
Note: 1) Woolens keypad can be used to pause/resume the diagnostic cycle.
2) Delicate & Knits keypad will cancel the cycle and exit the diagnostic mode.
3) Permanent Press keypad, “CC”(Free cycle) will be displayed.
When you exit the service mode “Select Cycle” will be displayed