Technical information

Troubleshooting Procedures
!
WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power to washer before servicing, unless
testing requires power.
16027174 June 2006
RPL 16023431
©2006 Maytag Services
10
Blue wire Pin 2 on CN6 to Gray wire Pin 1 on CN3 120V
or approx 16 ohms
( ) Red wire Pin 4 on CN3 to White wi Hot Valve re Pin 1 on Main. Approx 11,000 ohms or 120 volts.
( ) Orange wire Pin 3 on CN3 to White Bleach Valve wire Pin 1 on Main. Approx 11,000 or 120 volts.
( ) Blue wire Pin 2 on CN3 to White wi Cold Valve re Pin 1 on Main. Approx 11,000 ohms or 120 volts.
4 3 2 1
12
5 4 3 2 1
Yellow wire Pin 3 on CN4 to Pink
wire Pin 4 (5V+DC or approx 12,000 ohms)
4 3 2 1
8
CN3
MAIN
Tub Sump
Thermistor/
DRAIN PUMP
WATER VALVE
CN3
CN4
Pressure SW
Main
Component Diagnostics
NOTE: For ohm checks unplug harness connector on console and test from wire insertion side of the harness
connectors.
2
1
2
1