Installation guide

240 EdwardsStreet,SE
C;eve{end,Tennessee37311
Tek 422-472-33,g3
Fax:[phone]:0
FINISH
All the cabinet and external finishes are protected against rust to keep product looking well
for many years. Cleaning and waxing will provide additional protection to these finishes.
The washer top has a porcelain finish. Since porcelain is "glass" bonded to metal, it is very
durable. Avoid damage from sharp blows of objects or tools used around and in the appli-
ance.
Clean the control panel with a soft damp cloth. Avoid abrasive cleaners that would scratch
the surface. A coat of household was will reduce the chance of scratches on the control panel
surface.
Caution: If "spilled" or used improperly, bleaches and other strong laundering chemicals can
permanently spot or stain finishes unless wiped up immediately. Aerosol pretreat products
can also damage finish on control panel. When using these products on garments placed in
the stacked washer/dryer, it is advisable to avoid control panel area with the overspray.
WATER DAMAGE FROM FLOODING
In the event the stacked washer/dryer is exposed to water from flooding, call you local May-
tag dealer before using. Always unplug the appliance and have a qualified technician inspect
the appliance before any attempt is made to operate the unit. Never wash product inside and
out with a garden hose or pressure cleaning equipment.
REPLACEMENT PARTS
If your unit requires replacement parts, contact the dealer from who you purchased your
appliance, or Maytag Customer Service. 240 Edwards St. SE, Cleveland, TN 37311 for
information on the nearest Maytag parts distributor.
Service manuals are available through your dealer or nearest parts distributor.
MAYfAG ._dm_rat n _JENN-_MI:; _lilaqic C_'lef