User guide

240 EdwardsStreet SE
Cleveland,Tennessee37311
Tel:[phone]
Fax:[phone];0
Do not modify the plug provided with the appliance - if it will not fit the outlet, have a
proper outlet installed by a qualified electrician.
l
An external ground wire, clamp and screws are provided for assistance in meeting local
codes. Where approved, it is recommended this additional ground be installed. A suitable
external ground connection MUST be determined prior to wire hookup.
NEVER CONNECT GROUND WIRE TO PLASTIC PLUMBING LINES, GAS LINES OR
HOT WATER PIPES.
ELECTRIC MODELS
U.S. MODELS ONLY
This electric dryer must be connected to a grounded metal, permanent wiring system; or an
equipment grounding conductor must be run with the circuit conductors and connected to the
equipment grounding terminal on the back panel.
Electric models are shipped with a ground strap connected from the neutral terminal block
post to the frame of the dryer. The use of this strap is permitted by the National Electrical
Code. If the local code prohibits the use of the ground strap, the dryer must be grounded in
accordance with local codes.