Use & care guide

Installation clearances
• The location must be large enough to allow the washer door
to be fully opened.
• Additional spacing should be considered for ease of installation
and servicing. The door opens more than 90 °, and it is not
reversible.
• Additional clearances might be required for wall, dooi, and floor
moldings.
• Additional spacing of 1" (25 mm) on all sides of the washer
is recommended to reduce noise transfer.
Companion appliance spacing should also be considered.
Washer Dimensions
(1276ram)
27"
38"
1914ram)
(775ram)
Recommended installation spacing for custom undercounter
installation
The dimensions shown are for the recommended spacing.
Custom undercounter installation - Washer only
(25ram) (686ram) (25ram)
I I
Recommended installation spacing for recessed or closet installation,
with or without a pedestal
The dimensions shown are for the recommended spacing.
Recessed area or closet installation
1"--_,..It",_-30V2"--'_ "
(25ram) (775mm) (102mm)
48 in.t_
48" (310cm2}
(1220mm)
_L
24 in.t_
(155cm2)
A B
---_3"
(76ram)
A. Side view - closet or confined area
B. Closet door with vents
Recessed or closet installation - Washer on pedestal
t
38"rain.
{965ram'
L___
"_'--301/2"-'-_ 4"
(775mm) (102mm)
A
A. Recessed area
B. Side view - closet or confined area