Specifications

ELECTRICAL

Refer to serial plate for specific

electrical requirements. For

more detailed information refer

to section on

Electrical

Requirements

WATER

Washer needs two standard

3/4 inch water supply faucets

with a pressure between

20–120 pounds per square inch.

For more detailed information

refer to section on

Water

Requirements

PARTS supplied for installation:

Cable tie to secure drain hose to standpipe, inlet hose or laundry tub

• Multi wrench

• Utility knife

• Channel lock

•Level

READ THIS BEFORE YOU START…

Tools needed for installation:

CABINET DIMENSIONS

WASHER DIMENSIONS INCH (CM)

A. Height – Overall* 33.25” (84.5)

B. Depth to Front of Control Dial 26” (66.1)

C. Width 23.5” (59.7)

D. Depth – With Washer Door Open 90° 41.25” (104.3)

E. Depth 24” (60.9)

Note:

The height of the washer from top to floor is 33 1\4" this includes the leveling leg screwed all the way in. The customer

can unscrew the leg out an additional 7\8" for a total overall height of 34 1\8".