Specifications

To avoid risk of electrical shock, personal injury or

death; disconnect power to unit before servicing.

Disassembly Procedures

WARNING

26.Remove rear Spinner Pulley.

NOTE: After Spinner Pulley bolt is removed Spinner can

fall from tub. Block Spinner to prevent Spinner

from falling free.

27.Remove bolts around perimeter and separate the tub

halves.

NOTE: During reassembly snug bolts in a cross pattern

before tightening to prevent tub warp.

28.Remove Spinner.

25.Loosen screw and remove boot from tub lip.

23.Use weight bolts to lift tub and unhook Suspension

Springs.

24.Grasp the front and rear of the tub and remove from

cabinet.