Specifications

©2004 Maytag Services 16023430 Rev. 0 19
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
Disassembly Procedures
WARNING
!
6. Remove 5 screws retaining Control Board to Console.
8. Separate the Control Board from the Console.
Boot Removal
1. Disconnect power supply to unit.
2. Remove Boot retainer spring.
3. Remove boot retainer wire from groove.
4. Pull boot over lip on Front Panel.
Door Assembly Removal
1. Remove Door Hinge with screwdriver and 5/16”
wrench.