Specifications

4-15
5. To remove the flame sensor:
a) Disconnect the two wire connectors
from the sensor terminals.
b) Remove the flame sensor screw from
the burner venturi and remove the
sensor.
6. To remove the high-limit thermostat or
the thermal cutoff:
a) Disconnect the two wire connectors
from the component terminals.
b) Remove the two screws from the high-
limit thermostat, or single screw from
the thermal cutoff, and remove the
component from the venturi.
Venturi
Screw
Flame Sensor
Wire Connectors
High-Limit Thermostat (2 Screws)
Pink Wire
Red & Blue
Wires
Thermal Cutoff
(1 Screw)
Venturi