Specifications

4-9
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug dryer or disconnect power.
2. Turn off gas supply to dryer.
3. Remove the front panel from the dryer
(see page 4-8 for the procedure).
4. Remove the three screws from the lint
duct and remove the duct.
WARNING
REMOVING THE THERMAL FUSE & EXHAUST THERMISTOR
Lint Duct Screws
5. Disconnect the two wire connectors from
the thermal fuse or exhaust thermistor
terminals.
6. Remove the screw(s) from the thermal
fuse or exhaust thermistor and remove
the component from the blower housing.
Blower Housing
Thermal Fuse
2 RD Wires
1 Screw
Exhaust Thermistor
2 RD-WH Wires
2 Screws