Specifications

4-7
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug dryer or disconnect power.
2. Turn off gas supply to dryer.
3. Open the dryer door.
4. Remove the screw from the drum light
lens and remove the lens.
WARNING
REMOVING THE DRUM LIGHT SOCKET
5. Remove the bulb from the light socket.
6. Remove the screw from the drum light
holder and pull the holder forward so you
can access the wires.
Lens Screw
Drum Light Lens
Light Holder Screw
Bulb
7. Disconnect the wires from the light holder
terminals.
Light Socket
Wire Connectors
8. Squeeze the locking arms and remove
the socket from the drum light holder.
Locking Arms