User`s guide

Oven smokes • Food too close to element. See page 13 for more information.
excessively during • Broiler insert covered with aluminum foil.
broiling• • Trim excess fat from meat prior to broiling.
• A soiled broiler pan was used.
..... wil ,ol.....r." 'h;c io2k; tro,=e ............
• Check to make sure the cycle is not set for a delayed start.
self-clean. • Check if door is closed. :
• • • • • • • • • • • • * • • • • • •,• • • • • • • • • * • • • • • • • * • • • • * * • • • • * * * * • • * * * * * * * • • • o •
Oven did not clean • Longer cleaning time may be needed.
properly• • Excessive spillovers, especially sugary andor acid foods, were not removed prior
to the self-clean cycle.
• • • • * * • * * • • • • • • * • • • i • • • • • • * • * • • • * • • • • • * * • ° . • • * * • * • • • • o * • * • • • • • • • • •
Oven door will not • Oven interior is still hot. Allow about one hour for the a oven to cool after the
unlock after completion of a self-clean cycle. The door can be opened when the LOCK
self-clean cycle, indicator word is not displayed.
• • • • • • * * • * * • • • • * • * *,• • . * * * * * * * • * * * * * • • o • * • * • . ° • • • • • • • • • * • • • • • • • • • •
Moisture condensation • This is normal when cooking food high in moisture.
collects on oven window• • Excessive moisture was used when cleaning the window.
• • • • • • • • • • • • • • • • • * •,• • • • • • • • • • • • * • • • • • • • • • * • • * • * * • * * * * * * * * * • * • * • • •
There is a strong odor • This is normal for a new range and will disappear after a few uses. Initiating a
or light smoke when oven clean cycle will "burn off" the smells more quickly.
is turned on. • Turning on a ventilation fan will help remove the smoke and/or odor.
• Excessive food soils on the oven bottom. Use a self-clean cycle.
• • • • 66° 95• * • • • • • • • • • • • • i• •• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
F plus a number This is called afault code. If a fault code appears in the display and beeps sound,
appears in display• press the CANCEL pad. If the fault code and beeps continue, disconnect power
to the appliance. Wait a few minutes, then reconnect power. If fault code and
beeps still continue, disconnect power to the appliance and call an authorized
servicer.
• If the oven is heavily soiled, excessive flare-ups may result in a fault code during
a clean cycle. Press CANCEL pad and allow the oven to cool for one hour, then
reset the clean cycle. If the fault code and beeps still continue, disconnect power
to the appliance and call an authorized servicer.
If You Need Service
• Call the dealer from whom your appliance was purchased or call Maytag Appliances Sales Company, Maytag
Customer Assistance at 1-800-688-9900, USA or 1-800-688-2002, CANADA to locate an authorized servicer.
• Be sure to retain proof of purchase to verify warranty status. Refer to WARRANTY (next page) for further
information of owner's responsibilities for warranty service.
• If the dealer or service company cannot resolve the problem, write to Maytag Appliances Sales Company, Attn:
CAIRTM Center, RO. Box 2370, Cleveland, TN 37320-2370, or call 1-800-688-9900, USA or 1-800-688-2002,
CANADA.
U.S. customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.
NOTE: When writing or calling about a service problem, please include the following information:
a. Yourname, addressand telephone number;
b. Model number and serialnumber;
c. Name and address of your dealer or servicer;
d. A clear description of the problem you are having;
e. Proof of purchase (sales receipt).
• User's guides, service manuals and parts catalogs are available from Maytag Appliances Sales Company,
Maytag Customer Assistance.
22